facebook

Procool SXT2280

Temperature controlled Variable Speed Silent Fan System

Fan model SXT2280

Add an SXT2280-SLAVE to your current system.
Model SX640-SLAVE is compatable with these systems...

SP640X
SP640TV
SP480X
SP480XT
SP280XT
The SLAVE fan comes with an interconnect cable to link to the controller of the master fan.

$149.99 In stock

Airflow Direction

Select quantity in cart.
Looking for the Slave version?
Model SXT2280-SLAVE
$149.99 In stock
Select Intake or Exhaust below:

Airflow Direction

Ships FREE to the USA

Need it fast?
Need a large quantity?
Call or email us for a quote.

0 Reviews

  • Description
  • Specifications
  • More Info
  • Reviews

PROCOOL SXT2280 (2U) Temp Controlled Rack Fan (4) SXT80 Fans/9-17 dBA @ 28-64 CFM

Silent Operation

With a noise level of only 12 dBA at low speed and 20 dBA at top speed, the SXT280 is one of the quietest 2U rack-mount fan models available.
The low noise makes this fan suitable for noise sensitive applications from home AV to professional studios.

Temperature controlled Variable Speed

1200-2400 RPM
Each fan has a temperature sensor that regulates the fan speeds independently.
When the sensor detects heat above 77°F the fan speed will begin to increase. The fan will reach full speed at 104°F.
The sensor should be located on or near the heat source for optimal performance.

Airflow

56-128 CFM
As temperature and speed increase the airflow increases to provide optimum cooling for most racks.

Available in both intake and exhaust versions.
The Intake model SXT2280 blows air into the rack.
The Exhaust model SXT2280-E pulls air from the rack.

SLAVE Option

The SLAVE fan (model SXT2280-SLAVE) comes with an interconnect cable in place of the power supply.
The interconnect cable allows you to connect any procool rack fan to a Master fan with temperature controller.

Quietest Fan Available - 12-20 dBA
Medium Airflow - 56-128 CFM
3 Year Warranty

fan model SXT80 SXT80 wires

Procool SXT80 Fans...

Procool model SXT80 fans are Silent temperature controlled variable speed 80mm fans.

Speeds range from 1200 RPM idle start speed to 2400 RPM at full speed.

SXT80 fans have a thermal sensor that detects the temperature and tells the fan how fast to run. The sensor should be located on or near the heat source for optimal performance.

When the sensor detects heat above 77°F the fan speed will begin to increase.The fan will reach full speed of 2400 RPM at 104°F.

power supply

Power supply model # PSW-12V1A

Input: 100-240 VAC

Output: 12VDC

AC plug type: NEMA 1-15P

DC Cable: 36 inch with 2.1mm barrel plug)

Fits in one rack space when plugged as shown

Panel Size: (2U) 19" x 3.5" x 1.5" Air Pressure Chart
SXT80 Air Pressure Chart

Thermistor Speed Chart
SXT80 Speed Chart
Panel color/material: black/metal
Fans: 4
Fan Size: 80mm x 80mm x 25mm
Fan Speed: 1200-2400 RPM
Air Flow: 56-128 CFM
Noise: 12-20 dBA
Bearings: FDB, fluid dynamic bearings
Fan Thermistor wire length: 24"
Controller Thermal Probe length: --
Power Supply: 100-240 VAC - 12 VDC
Power Supply Cable length: DC-36"
Power Supply Plug Type: NEMA 1-15P
Current draw: 0.68A
Power consumption: 8.16w
Grills/Guards: Black Wire

Installation Instructions

Mount the fan in the desired location. Connect the power supply to the fan panel with the mating plugs. Connect the power supply to AC power. The power supply accepts from 100 to 240VAC.

Operating Instructions

Data sheet downloadSXT2280 Operating Instructions.pdf

Care and Maintenance

To maintain optimal performance, keep the fans clean. Canned air works well. If the fans are used outdoors or in a dusty environment is recommended to clean the fan blades as needed to keep clean.

Blade Removal

For cleaning and maintenance, the blade prop can be removed.
Grasp the blade prop and pull straight out of the fan body. Inspect the shaft and lubricate if needed. Any oil will work; light grease works best. Clean blade as needed with a dry cloth. Soap and water can be used if needed, but should be thoroughly rinsed and dried before use. Reinstall the blade; when properly installed the blade will snap into place.

Troubleshooting

The fan will not start:

1. Is the light on the power switch on? If Yes, skip to #3.
2. Check the power connections. The power supply has a green led indicator, it should be on. If it is not check the power source. If not lit or flashing, it would indicate power supply failure or no power source power.
3. Check the fan blades to make sure they are fully seated in the housing. Press on the center of the blade and push in. If it is not seated you can hear it snap into place.
4. Turn the fan blade by hand to see if they are stuck. They should be free moving. If this starts the fan it is likely the fans need maintenance.

The fan is making noise:

1. Check for anything that could be rubbing against the fan blade.
2. Make sure the fan blades are clean. Dirty fan blades can cause a rattling noise.
3. Check the blade prop shaft for lubrication. (See step #3 above)

If the above steps do not solve the problem, contact our friendly customer service for assistance.

Customer Reviews

0 / 0 Reviews

Be the first to review this fan.

SAMPLE REVIEWS

Reviewed By: Jimmy on May 23rd 2016

The best rack cooling fan I've ever owned.

Reviewed By: John on May 24th 2016

Keeps my rack cool and is absolutely silent.

  • PROCOOL SXT2280 Review

  •  -
  • Should be Empty:

Frequently purchased with this item

C14 adaptor cable

Converts NEMA 5-15R to IEC320 C14
Use to connect all Procool power supplies to C13 receptacle.
Length = 12 inches
Part No. PSA-C14

EU plug adaptor

Converts US or EU plug to fit Australian outlets
Part no. PSA-AU



AU plug adaptor

Converts US and UK plug to fit European outlets
Part no. PSA-EU